TP-Link Omada Prime Day Deals: Wi-Fi 7 and 2.5G

Quick answer: which deals fit which use case

These TP-Link Omada Prime Day deals cover several different network jobs. The right choice depends on the problem you are solving:

• Buy the EAP772-Outdoor at $209.99 when you need a tri-band outdoor access point with 6 GHz support through AFC.
• Buy the EAP720 at $84.99 when you want an inexpensive indoor Omada Wi-Fi 7 access point and do not need a 6 GHz radio.
• Buy the TL-SG108S-M2 at $49.99 when you need eight silent, unmanaged 2.5GbE ports for wired devices. It does not supply PoE.

The Amazon Creator Connections pricing supplied for this campaign is scheduled to expire July 1, 2026. Prices and inventory can change before the stated deadline, so verify the product model and final price at checkout. Because TP-Link's own similar monthly promotion is labeled through June 30, buying by June 30 avoids cutoff-time ambiguity.

All seven TP-Link deals compared

These are not seven interchangeable products. The EAP models provide client Wi-Fi, the switches provide wired multi-gig connectivity, and the Beam Bridge creates a directional link between two locations. Start with the job, then choose the hardware.

EAP772-Outdoor for tri-band outdoor Wi-Fi

The EAP772-Outdoor is the higher-tier outdoor access point in this campaign. It fits a large patio, pool area, courtyard, outdoor workspace, hospitality area, or property edge that needs a purpose-built access point rather than signal leaking through an exterior wall.

TP-Link specifies tri-band BE11000 Wi-Fi 7, one 2.5GbE PoE+ port, IP68 protection, AFC-enabled outdoor 6 GHz, and 3,200 sq. ft. of recommended omnidirectional coverage. The Amazon listing may advertise a larger figure, but we use TP-Link's official 3,200 sq. ft. planning number. Even that is not a guarantee: mounting height, trees, masonry, neighboring interference, client antennas, and the shape of the yard all affect the result.

At $209.99 versus the campaign's $249.99 reference price, the discount is $40, or 16%. Pay the premium over the EAP725-Outdoor when you specifically want:

• the additional 6 GHz band for compatible clients
• a tri-band AP in a current Omada design
• the stronger IP68 enclosure rating
• a straightforward omnidirectional coverage pattern

Do not place it low behind furniture, under a metal deck, or inside a utility room and expect the coverage figure to survive. Outdoor Wi-Fi works best when the AP has a clean view of the area it is meant to serve. Read our outdoor Wi-Fi planning comparison before deciding on the mounting location.

EAP725-Outdoor for lower-cost directional coverage

The EAP725-Outdoor at $149.99 is the better value when outdoor 6 GHz is not a requirement. It is a dual-band BE5000 Wi-Fi 7 access point with a 2.5G PoE port, IP66 weather protection, and software-selectable directional or omnidirectional antenna behavior.

That antenna flexibility is the reason to choose it. Use the omnidirectional mode when the AP can sit near the center of the outdoor area. Use a directional pattern when it mounts on the building edge and needs to push coverage toward a patio, yard, parking area, or outbuilding.

TP-Link recommends roughly 3,229 sq. ft. in omnidirectional mode and up to 5,500 sq. ft. in directional mode. Those figures describe different coverage shapes, not a promise that one AP will deliver the same speed everywhere in the area.

Choose EAP725-Outdoor over EAP772-Outdoor when:

• most outdoor clients use 2.4 GHz or 5 GHz
• you want to save $60
• a directional pattern fits the property better than a 360-degree pattern
• IP66 is sufficient for the planned mounting location

Choose EAP772-Outdoor when tri-band capacity, outdoor 6 GHz, or IP68 is worth the extra cost.

Indoor Wi-Fi 7: EAP720 vs EAP770

The EAP720 and EAP770 serve two different indoor budgets.

The EAP720 is the value pick. At $84.99, it provides dual-band BE5000 Wi-Fi 7, one 2.5GbE port, 802.3at PoE support, and a DC adapter in the promoted US package. It is a practical choice for an office, apartment, or one-AP zone where 5 GHz performance matters more than having a separate 6 GHz band.

The EAP770 costs $75 more at $159.99. That buys a tri-band BE11000 design with 6 GHz and substantially more aggregate radio capacity. It is the better choice for a busier office, a tech-heavy home, or a multi-AP design where newer 6 GHz clients can be moved away from crowded 5 GHz channels.

Do not buy the EAP770 solely because its headline number is larger. A 1GbE switch path, poor AP placement, older clients, or an internet plan below 1Gbps can hide much of the difference. The Omada Wi-Fi 7 deployment guide explains where the AP, switch, gateway, and controller fit together.

For office-specific placement and model choices, see our Omada access point guide for small offices. If you are still choosing a managed networking platform, compare UniFi and TP-Link Omada before committing to the controller and switching ecosystem.

2.5G switching: TL-SG105S-M2 vs TL-SG108S-M2

The switch deals are the easiest purchases in the group to understand. Both models are fanless, unmanaged, plug-and-play 2.5GbE switches. The five-port TL-SG105S-M2 costs $39.99 and the eight-port TL-SG108S-M2 costs $49.99.

For only $10 more, the eight-port model is the better default unless desk space is unusually tight. After reserving one port for the router or upstream switch, the five-port unit leaves four device ports while the eight-port unit leaves seven.

Good uses include:

• connecting a 2.5GbE NAS and workstation at the same desk
• giving a gaming PC, media server, and Wi-Fi 7 AP a multi-gig path
• upgrading one room without replacing the whole network
• aggregating several 2.5GbE devices before a faster core uplink

The limitation is power. These are not PoE switches. An EAP720 or EAP770 can use its included DC adapter while carrying data through one of these switches. The outdoor APs generally call for a properly planned PoE+ path.

Also check the uplink. If the switch connects to the router through a 1GbE port, devices on the same switch can still exchange local traffic above 1Gbps, but internet traffic and traffic leaving that switch remain limited by the 1GbE uplink. Use the 2.5GbE no-rewire upgrade guide to trace the full path before buying.

Point-to-point links: Beam Bridge 5 UR KIT

The Beam Bridge 5 UR KIT at $126.99 solves a different problem: carrying a network between two points without trenching a cable route.

TP-Link rates the preconfigured kit for up to 15 km under suitable conditions. It uses directional 23 dBi antennas, a 5 GHz 867 Mbps radio link, one Gigabit Ethernet port per bridge, 802.3af or passive PoE, IP65 enclosures, and app-guided alignment. A passive PoE adapter is included.

The 15 km figure is a maximum link-distance rating, not a typical backyard performance promise. Trees, terrain, buildings, Fresnel-zone obstruction, interference, mounting stability, and alignment can reduce reliability long before the rated distance. The Gigabit Ethernet port also makes clear that this is not a multi-gig bridge.

Use it for:

• a detached garage, barn, workshop, gate, or camera location with clear line of sight
• a temporary site where trenching is not justified
• a path where properly installed fiber is impractical

Do not confuse the bridge with an outdoor access point. The bridge moves the network to the far building. You may still need a switch and an indoor or outdoor AP at that end to provide Wi-Fi to phones, laptops, cameras, and other clients.

For permanent inter-building links, fiber remains the cleanest wired option because it avoids a conductive copper path between buildings. Our detached-building network guide compares fiber, copper, and wireless bridge designs in detail.

Three complete setups under this promotion

The under-$150 build is a practical starting point, but it is not a complete router replacement. You still need a gateway/router, Ethernet cabling, and either an Omada controller or standalone configuration appropriate to the site. The non-PoE switch works in that package because the promoted EAP720 includes a DC adapter.

Buying checklist before July 1

If you are designing a multi-AP property or business network rather than adding one device, request a network assessment. AP placement, PoE budget, controller choice, cable paths, and switch uplinks decide whether the hardware performs as intended.

FAQs

References and price check

• TP-Link Omada promotion page — deal prices checked June 27, 2026
• EAP772-Outdoor official specifications
• EAP725-Outdoor official specifications
• Beam Bridge 5 UR KIT official specifications
• TL-SG108S-M2 official specifications